KCSE Woodwork Topical Question Bank (1996–2024)
Grouped by topic • Step-by-step answers • Follows KCSE format
1. Safety and Workshop Practices
Sample KCSE 2019 – Paper 1 Question:
State four safety precautions to observe when using a wood lathe.
State four safety precautions to observe when using a wood lathe.
Answer:
• Ensure the workpiece is securely fixed.
• Remove loose clothing and jewelry.
• Always wear goggles.
• Keep tools sharp and properly adjusted.
• Ensure the workpiece is securely fixed.
• Remove loose clothing and jewelry.
• Always wear goggles.
• Keep tools sharp and properly adjusted.
2. Tools and Equipment
Sample KCSE 2015 – Paper 1 Question:
State two differences between a tenon saw and a dovetail saw.
State two differences between a tenon saw and a dovetail saw.
Answer:
• Tenon saw has a longer blade; dovetail saw is shorter.
• Tenon saw is used for larger joints, dovetail saw for fine joints.
• Tenon saw has a longer blade; dovetail saw is shorter.
• Tenon saw is used for larger joints, dovetail saw for fine joints.
3. Timber and Its Properties
Sample KCSE 2018 – Paper 1 Question:
List three defects found in timber and explain their causes.
List three defects found in timber and explain their causes.
Answer:
• Knot – where branch grows out.
• Shake – separation due to improper seasoning.
• Split – caused by uneven drying.
• Knot – where branch grows out.
• Shake – separation due to improper seasoning.
• Split – caused by uneven drying.
4. Joints
Sample KCSE 2020 – Paper 2 Question:
Describe how to make a through mortise and tenon joint.
Describe how to make a through mortise and tenon joint.
Answer:
• Mark out mortise and tenon positions.
• Cut mortise using a chisel.
• Cut tenon with tenon saw.
• Test fit and adjust before gluing.
• Mark out mortise and tenon positions.
• Cut mortise using a chisel.
• Cut tenon with tenon saw.
• Test fit and adjust before gluing.
5. Finishing
Sample KCSE 2017 – Paper 1 Question:
Explain the steps followed when applying varnish on a wooden surface.
Explain the steps followed when applying varnish on a wooden surface.
Answer:
• Sand surface smooth.
• Remove dust.
• Apply first coat and allow to dry.
• Lightly sand and apply final coat.
• Sand surface smooth.
• Remove dust.
• Apply first coat and allow to dry.
• Lightly sand and apply final coat.
6. Furniture Design and Construction
Sample KCSE 2016 – Paper 2 Question:
List three factors to consider when designing a chair.
List three factors to consider when designing a chair.
Answer:
• Comfort and ergonomics.
• Type of material used.
• Aesthetic appeal and stability.
• Comfort and ergonomics.
• Type of material used.
• Aesthetic appeal and stability.
7. Timber Seasoning and Preservation
Sample KCSE 2022 – Paper 1 Question:
Differentiate between air seasoning and kiln seasoning of timber.
Differentiate between air seasoning and kiln seasoning of timber.
Answer:
• Air seasoning uses natural air; kiln seasoning uses controlled heat.
• Kiln seasoning is faster and more uniform.
• Air seasoning uses natural air; kiln seasoning uses controlled heat.
• Kiln seasoning is faster and more uniform.
8. Workshop Drawing and Measurement
Sample KCSE 2021 – Paper 2 Question:
Draw an orthographic projection of a simple stool showing front, side, and plan views.
Draw an orthographic projection of a simple stool showing front, side, and plan views.
Answer:
Follow KCSE drawing conventions: use correct scales, line weights, and dimensioning.
Follow KCSE drawing conventions: use correct scales, line weights, and dimensioning.
9. Metal and Other Materials in Woodwork
Sample KCSE 2014 – Paper 1 Question:
State two uses of mild steel in furniture construction.
State two uses of mild steel in furniture construction.
Answer:
• Used for hinges and fittings.
• Used as reinforcements or leg frames.
• Used for hinges and fittings.
• Used as reinforcements or leg frames.
10. Maintenance of Tools
Sample KCSE 2013 – Paper 1 Question:
Explain why it is important to oil tools after use.
Explain why it is important to oil tools after use.
Answer:
To prevent rusting and ensure smooth operation.
To prevent rusting and ensure smooth operation.
11. Power Tools and Machinery
Sample KCSE 2023 – Paper 1 Question:
List three safety precautions when using an electric planer.
List three safety precautions when using an electric planer.
Answer:
• Disconnect from power before adjustments.
• Keep hands away from blades.
• Use both hands for control.
• Disconnect from power before adjustments.
• Keep hands away from blades.
• Use both hands for control.
12. Project Work and Costing
Sample KCSE 2012 – Paper 2 Question:
Outline three factors that determine the cost of a woodwork project.
Outline three factors that determine the cost of a woodwork project.
Answer:
• Cost of materials.
• Labour and time.
• Finishing requirements and complexity.
• Cost of materials.
• Labour and time.
• Finishing requirements and complexity.
No comments:
Post a Comment